1 - What Layer 3 features are not supported on the ACX5000 that you need to be able to provide ? I use my ACX5048's as MPLS PE boxes doing L3VPN's (ipv4 vpn and 6vpe) just fine..... I have multiple vrf's for different L3 domains, regular internet, cgnat private domain, and voice vrf
2 - if you must haul ACX traffic as L2 back to MX it seems like you could just setup a hub-spoke ... ****** Something like this on MX (hub)... (forgive me as I'm mixing and matching some MX and ACX commands, you may have to find the platform-specific way of doing this) set routing-instances 20930 instance-type vpls set routing-instances 20930 routing-interface irb.1234 set routing-instances 20930 protocols vpls vpls-id 930 set routing-instances 20930 protocols vpls neighbor 10.101.12.6 set routing-instances 20930 protocols vpls neighbor 10.101.28.8 set routing-instances 20930 protocols vpls neighbor 10.101.12.5 set routing-instances 20930 protocols vpls no-tunnel-services ****** something like what I already sent you for the ACX (spoke) set interfaces ge-0/0/38 encapsulation ethernet-ccc set interfaces ge-0/0/38 unit 0 family ccc set protocols l2circuit neighbor 10.101.12.251 interface ge-0/0/38.0 virtual-circuit-id 20930 https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/ vpls-irb-solutions.html -Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
