Mike, For 20K you can get a new MX204 (not to be confused with MX240). However, I don't think the MX204 support CGNAT if needed, but I could be wrong. But I wouldn't touch a MX80 or MX104 if buying new.
On Mon, Apr 9, 2018 at 8:45 PM, <mike+j...@willitsonline.com> wrote: > Greetings, > > I am looking for some advice concerning juniper as an edge router. > > I see there is a terrific amount of used mx104 and mx240 out there > and the specs all seem great. What I'm looking to do is have 2x 10g > feeds, route bgp, do flow exporting, and do a certain amount of ingress > filtering to protect the network from ddos.Id even like to do cgnat for > up to 5000 users but not sure if a single box setup would be wise. > > I just don't have a handle on the various juniper platforms and > route engine options. Love to keep this under $20,000 and get a load of > 10g interfaces. Anyone here can tell me what I should be looking for? > > Mike- > _______________________________________________ > juniper-nsp mailing list email@example.com > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list firstname.lastname@example.org https://puck.nether.net/mailman/listinfo/juniper-nsp