=> reset
U-Boot 1.1.6-JNPR-2.7 (Build time: Nov 26 2013 - 19:04:49) Initializing memory this may take some time... Measured DDR clock 266.62 MHz SRX_100H2 board revision major:1, minor:0, serial #: BZ4214AF1453 OCTEON CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate) DRAM: 2048 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... 4 USB Device(s) found scanning bus for storage devices... Read Error for STMicroelectronics device 0 Not intializing this device, disabling autoboot Device may need formatting, please issue command : <nand_format> at console prompt to format 2 Storage Device(s) found Clearing DRAM........ done BIST check passed. Boot Media: nand-flash usb Net: pic init done (err = 0)octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds => nand-format Unknown command 'nand-format' - try 'help' On Sun, 11 Nov 2018 at 04:17, Muhammad Atif Jauhar <atif.jau...@gmail.com> wrote: > Hi Khalil, > > Kindly follow below link to recover it. > > > https://forums.juniper.net/t5/SRX-Services-Gateway/Boot-problem-of-UBoot-srx240-having-status-LED-red/td-p/211103 > > Regards, > > Muhammad Atif Jauhar > (+966-56-00-04-985) > > > On Sun, Nov 11, 2018 at 11:36 AM Mohammad Khalil <eng.m...@gmail.com> > wrote: > >> Hello all >> I have my Juniper SRX 100h stuck in the u-boot mode >> I have tried to download a new image on a USB stick , plugged it into the >> device and tried to upgrade with no luck >> Looked around but could not find a solution , anyone can help please? >> >> BR, >> Mohammad >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp