The firmware that ships on the SRX is missing a lot of features. I would recommend upgrading to the latest version in that code train, which is 15.1X49-D150.
-- Eldon On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <[email protected]> wrote: > Hello all > I have an old SRX which I configured it is WAN IP address using the below > command: > set interfaces ge-0/0/0 unit 0 family inet address dhcp > > Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) but I > cannot find the command itself > I have tried the below: > set interfaces ge-0/0/0 unit 0 family inet dhcp-client > With no luck ! > When I try to check : > show system services ? (no DHCP option is available) > I have configured: > set security zones security-zone untrust interfaces ge-0/0/0.0 > host-inbound-services dhcp > > Any ideas guys? > > BR, > Mohammad > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
