I cannot do the upgrade right now as I have to do the setup so quickly What features should I enable ?
On Mon, 10 Dec 2018 at 17:40, Eldon Koyle <[email protected]> wrote: > The firmware that ships on the SRX is missing a lot of features. I would > recommend upgrading to the latest version in that code train, which is > 15.1X49-D150. > > -- > Eldon > > On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <[email protected]> > wrote: > >> Hello all >> I have an old SRX which I configured it is WAN IP address using the below >> command: >> set interfaces ge-0/0/0 unit 0 family inet address dhcp >> >> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3) but >> I >> cannot find the command itself >> I have tried the below: >> set interfaces ge-0/0/0 unit 0 family inet dhcp-client >> With no luck ! >> When I try to check : >> show system services ? (no DHCP option is available) >> I have configured: >> set security zones security-zone untrust interfaces ge-0/0/0.0 >> host-inbound-services dhcp >> >> Any ideas guys? >> >> BR, >> Mohammad >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
