Your 960 will be choked if you are going to push a decent traffic volume
through it. And circulation through backplane to and from service cards
will only make it worse.
Just imho. Your choice.
Kind regards,
Andrey Kostin
Aaron Gould писал 2020-03-09 09:18:
In my case, 960 has a lot of slots, and I use slot 0 and slot 11 for
MPC-7E-MRATE to light up 100 gig east/west ring and 40 gig south to ACX
subrings, so I have plenty of slot space for my MS-MPC-128G nat
module... If
I place it somewhere else, then I gotta cross the network to some
extent to
get to it... also, my dual 100 gig inet connections are on a couple of
those
960's where I colo the mpc-128g card, yeah, it's all right there. Not
the
case for dsl nat, that's across the network in a couple mx104's, but
dsl
doesn't have near the speeds that my ftth and cm subs have.
-Aaron
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
