Hello Darren, your advice was right. Also i found an old mail on the list by Tomek Mrugalski from Aug 2016 where he recommends just the same solution. I suppose Kea treats all 192.168.x.y addresses as a class C (/24) without looking for the netmask on the interface. After including "interface": "enp1s0" in the subnet config it works like i expected. Thanks for your help!
regards Jörg -- Mit freundlichen Grüßen im Auftrage Jörg Hartmann Referat P2 / IT-Stelle Landesrechnungshof Sachsen-Anhalt 06844 Dessau-Roßlau, Kavalierstraße 31 Tel. +49 340 2510 404 -----Ursprüngliche Nachricht----- Von: Kea-users <kea-users-boun...@lists.isc.org> Im Auftrag von Darren Ankney Gesendet: Donnerstag, 31. Oktober 2024 09:50 An: Kea user's list <kea-users@lists.isc.org> Betreff: [EXTERN] Re: [Kea-users] Problem with ip address range in subnets Hi Jôrg, You might be able to overcome this by using the interface parameter. "interface": "eth0", added to the subnets that are each on the interface might help, but I've never personally tested assigning multiple subnets to the same interface. It may be that the wrong subnet mask will be computed and sent to the client as well since these subnets do not match what is configured on the interface, it seems. Thank you, Darren Ankney On Wed, Oct 30, 2024 at 9:41 AM Sten Carlsen <st...@s-carlsen.dk> wrote: > > > Thanks > > Sten > > On 30 Oct 2024, at 14.24, Kevin P. Fleming <lists.kea-us...@kevin.km6g.us> > wrote: > > On Wed, Oct 30, 2024, at 07:58, Hartmann, Jörg wrote: > > The error message is "no suitable subnet configured for a direct client". > If i give the cisco phones a part of 192.168.22.0 they get IPs to. So it's a > probably an error with the netmask which i dont understand. > The server has 192.168.22.0/23 so 192.168.23.0/24 should be part of his > address range. > Could someone pls explain why the server dont distributes IPs from > 192.168.23.0 ? -- ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. To unsubscribe visit https://lists.isc.org/mailman/listinfo/kea-users. Kea-users mailing list Kea-users@lists.isc.org https://lists.isc.org/mailman/listinfo/kea-users
