Le 23/06/2019 à 13:52, Jeff Young a écrit : > I’ve pushed new bits which fix this corner case, and some performance > enhancements to make up for the extra processing required.
Much better now! > >> On 23 Jun 2019, at 10:01, jp charras <[email protected] >> <mailto:[email protected]>> wrote: >> >> Le 22/06/2019 à 20:23, Jeff Young a écrit : >>> Hi JP, >>> >>> Can you point me to some of the clearance violation issues? >>> >>> I’m aware of the one where a track that goes within the thermal >>> clearance radius can produce a DRC error, but I’d consider that what >>> DRC is for. But it sounds like there are others? >>> >>> Thanks, >>> Jeff. >>> >> >> Hi Jeff, >> >> I attached a board that exhibit a DRC error between a pad and a thermal >> stub. >> See U2, pads 6 and 7. >> The clearance is roughly 0.22 mm, but the GND min clearance is 0.28mm >> and the zone clearance is 0.5mm >> >>> >>>> On 22 Jun 2019, at 18:58, jp charras <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> Le 22/06/2019 à 18:37, Jeff Young a écrit : >>>>> New, higher-performance bits in, with some (perhaps all) of the >>>>> bugs fixed. >>>>> >>>>> Testing would be appreciated. >>>>> >>>>> Cheers, >>>>> Jeff. >>>>> >>>> >>>> Hi Jeff, >>>> >>>> Usually, when 2 bugs are fixed, one new bug is created. >>>> >>>> Thermal stubs are missing for pads having a different size in X and Y >>>> direction. >>>> They are missing for the biggest direction. >>>> >>>> Apart from that: >>>> * The calculation time is bigger than the current algo, but no longer >>>> blocking (for instance 2 sec instead of less than 1 sec in a bad case). >>>> * Much more annoying, the thermal stubs can create DRC issues: >>>> They do not always respect the zone clearance, and in some cases do not >>>> respect the netclass clearance. >>>> >>>> They also create some shape artifacts. >>>> They are of course not the same as the current algo, but they exist. >>>> >>>> -- >>>> Jean-Pierre CHARRAS >> >> -- >> Jean-Pierre CHARRAS >> <pic_programmer_test_zone.kicad_pcb> > -- Jean-Pierre CHARRAS _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
