After some mining through my memory I remembered that the best solution on Linux is to print directly to postscript pritnter (if you have one). I always had problems with emulations.
Now, I'm using Mac OS X and I don't know how to directly print to the printer (so avoiding the driver). But since I am experimenting with CNC machine I don't really care about that. B. On 2007.1.23, at 22:05, David Gravereaux wrote: > Richard Burton wrote: > >> Sounds like the DPI setting on your print driver is set too low. > Mine is > >> set to > >> 600 dpi for my HP LaserJet 4 (non-ps) and I get excellent > quality prints. > >> It > >> could also be an issue with the graphic handling of your print > driver > >> itself. > > > > Thanks, but it turns out it's probably a wx bug print bug. As B > suggested I > > tried plotting to postscript, then after figuring out how to send > that > > direct to the printer I got a great version out. Even fixed a few > other > > things, like a straight line that didn't actually come out > straight, and > > improved the clearances on some close parts. > > > > Richard. > > Lucky me, I don't have that issue :) > > Next step for me is to find an old HP Laserjet 4MV that'll do > 11x17" with the > postscript option. That'll be document heaven for me. > > -- > That's the difference between me and the rest of the world! > Happiness isn't > good enough for me! I demand euphoria! -- Calvin > > ********************* mag./M.Sc. Boštjan Jerko Boštjan Jerko-Japina s.p., Raziskovanje in razvoj novih tehnologij Boštjan Jerko-Japina s.p., Research and development of new technologies ********************* Elektronika/Electronics, Programi/Software http://www.japina.eu slovenski blog: http://www.japina.eu/blog-slo English blog: http://www.japina.eu/blog-eng Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-devel Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
