jean-pierre charras - INPG wrote: > dave a écrit : > >>jean-pierre charras wrote: >> >> >> >>>dave a écrit : >>> >>> >>> >>>>Dan Andersson wrote: >>>> >>>> >>>> >>>> >>>>>On Sunday 25 November 2007 07:15:05 dave wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>what am i doing wrong? >>>>>> >>>>>>i drew up a schematic and made a netlist and started to layout the board. >>>>>>i >>>>>>found an error and when i went back to correct it and then make a new >>>>>>netlist the program changed several part numbers.. so then it gave me an >>>>>>error when it read the new netlist in the pcb layout program. >>>>>> >>>>>>it is driving me nuts!!! >>>>>> >>>>>>am i doing something wrong or is there a problem with the program? >>>>>> >>>>>> >>>>>>thanks for the help >>>>>> >>>>>>dave. >>>>>> >>>>>> >>>>> >>>>>The pcb layout does not replace or change modules as default, you need to >>>>>tick >>>>>the correct box for that in the net list read window. >>>>> >>>>>//Dan >>>>> >>>>> >>>> >>>>yes. this i understand. the problem is that in the eeschema program when i >>>>make changes and >>>>a make new netlist several part numbers ie: U12, U13, U14 are changed to >>>>U055, U056, U057 in the >>>>eeschema drawing and in the net list and then in the pcb drawing and that >>>>causes the traces that >>>>were on the old parts to have no connections? >>>> >>>>something is wrong somewhere, but is it something i am doing or is there a >>>>bug in the program? >>>> >>>> >>> >>>When eeschema renums components like U055, U056, U057 ... this is >>>because these components are flagged as "power symbols" >>>Only power symbols (like VCC, GND ...) must be flagged "power >>>component" because they are not really "components", they are special >>>symbols >>> >>> >> >>where are the power symbols on the component. it is something that i put >>there. >>i don't think so. i did not have a reason as they are just more of the >>component on the sheet. >> >>if they are marked how do i get rid of the mark? >> >> > > In Libedit, "edit component properties" dialog, uncheck "power symbol" > option > >
yes the power symbol was checked. thanks jean dave
