Magnus Beischer a écrit : > > I'm finnishing my board and found something strange. The DRC reports > no errors but I can see that a via is missing and that there is no > visual connection between the 2 segmenents. > > Can anyone take a look at the board uploaded to the files section in > "Files > Magnus B > jdd-pcb-b.brd" and try to clear this out. The > missing via is located left to L310 connecting layer 1 and layer 2. > I'm not sure this is a bug or just me who can't run the DRC... > Are you sure ? i see a via located left to L310 connecting layer 1 and layer 2. Of course, because your via diameter is smaller than track width (not a good practice!) if you want to see a small white via on a white track, select the sketch mode for tracks, or change the track color
-- Jean-Pierre CHARRAS Maître de conférences Directeur d'études 2ieme année. Génie Electrique et Informatique Industrielle 2 Institut Universitaire de Technologie 1 de Grenoble BP 67, 38402 St Martin d'Heres Cedex Recherche : Grenoble Image Parole Signal Automatique (GIPSA - INPG) 46, Avenue Félix Viallet 38031 Grenoble Cedex
