--- In [email protected], jean-pierre charras - INPG <[EMAIL PROTECTED]> wrote: > > Magnus Beischer a écrit : > > > > I'm finnishing my board and found something strange. The DRC reports > > no errors but I can see that a via is missing and that there is no > > visual connection between the 2 segmenents. > > > > Can anyone take a look at the board uploaded to the files section in > > "Files > Magnus B > jdd-pcb-b.brd" and try to clear this out. The > > missing via is located left to L310 connecting layer 1 and layer 2. > > I'm not sure this is a bug or just me who can't run the DRC... > > > Are you sure ? i see a via located left to L310 connecting layer 1 and > layer 2. > Of course, because your via diameter is smaller than track width (not a > good practice!) if you want to see a small white via on a white track, > select the sketch mode for tracks, or change the track color > > -- > Jean-Pierre CHARRAS > Maître de conférences > Directeur d'études 2ieme année. > Génie Electrique et Informatique Industrielle 2 > Institut Universitaire de Technologie 1 de Grenoble > BP 67, 38402 St Martin d'Heres Cedex > > Recherche : > Grenoble Image Parole Signal Automatique (GIPSA - INPG) > 46, Avenue Félix Viallet > 38031 Grenoble Cedex >
I changed the track color to yellow and I still don't see the via. I uploaded i screen dump of what I see in the files section. The missing via is left of L310 and should connect the segment coming from J5 pin 4. // Magnus
