From: Bob Shaffer <bob.shaf...@micromod.com>
To: kicad-users@yahoogroups.com
Sent: Wednesday, June 24, 2009 11:41:29 AM
Subject: RE: [kicad-users] Bad Bus Label error message when making netlist
Greg,
Well….
I’m so embarrassed! That was it. Thanks again for your help.
Bob
From: kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] On Behalf Of Greg Dyess
Sent: Wednesday, June 24, 2009 12:23 PM
To: kicad-us...@yahoogroups..com
Subject: Re: [kicad-users] Bad Bus Label error message when making netlist
Try changing the label to A_BUS[0..15] instead of A_BUS[0,15] (Note the "..." instead of ",").
In addition, I will load up your schematic and try to see what I can see.
Greg
From: Bob Shaffer <bob.shaf...@micromod.com>
To: kicad-users@yahoogroups.com
Sent: Wednesday, June 24, 2009 9:13:47 AM
Subject: RE: [kicad-users] Bad Bus Label error message when making netlist [1 Attachment]
[Attachment(s) from Bob Shaffer included below]
Greg,
I appreciate you taking the time to help me!
The attached files represent a simple test design that illustrate my problem. When I try to connect the two sheets together by drawing a Bus between A_BUS[0,15] on Sheet A to A_BUS[0,15] on Sheet B I get a popup error message “Bad Bus Label”. If I ignore the message and attempt to generate a netlist, I get the same error message.
Bob
From: kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] On Behalf Of Greg Dyess
Sent: Wednesday, June 24, 2009 9:23 AM
To: kicad-users@yahoogroups.com
Subject: Re: [kicad-users] Bad Bus Label error message when making netlist
My initial guesses would be:
1. You used a local label instead of a global label or net name.
2. Somehow numbers were not the last characters in the individual nets or the bus was not the prefix of the net names.
3. Buses in KiCAD are not like computer busses. Only nets with the same prefix followed by numbers are allowed in the bus. A0, A1, A2 in bus A[0..2] is a valid bus but WR, RD, CLK in bus Control is not valid.
(I did all of the above starting out)
It's difficult to analyze without seeing what you have done. If you email me directly with the archived project files I can load it up and see.
Greg
From: mmabshaffer <bob.shaf...@micromod.com>
To: kicad-users@yahoogroups.com
Sent: Tuesday, June 23, 2009 5:02:04 PM
Subject: [kicad-users] Bad Bus Label error message when making netlist
I just tried using KiCad for capturing a schematic and all went well until I tried to generate the netlist. I get a "Bad Bus Label" error popup message for each bus. The design is a hierarchical design with busses going between sheets. Can anyone give me a hint as to what I am doing wrong?
------------------------------------
Please read the Kicad FAQ in the group files section before posting your question.
Please post your bug reports here. They will be picked up by the creator of Kicad.
Please visit http://www.kicadlib.org for details of how
to contribute your symbols/modules to the kicad library.
For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/kicad-users/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/kicad-users/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:kicad-users-dig...@yahoogroups.com
mailto:kicad-users-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
kicad-users-unsubscr...@yahoogroups..com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Attachment(s) from Bob Shaffer
1 of 1 File(s)
