I have quiet the same problem and I posted there: http://tech.groups.yahoo.com/group/kicad-users/message/7205
I'd prefer to name GND and VCC with label in order to avoid inconsistencies. but it isn't probably the normal way.. Julien 2010/3/27 Andy Eskelson <[email protected]> > > > Yes invisible pins are auto connected. > > The Power pin not driven catches most new users out. > > All that is happening is that DRC is checking that there is a source of > power for a pin identified as power in. This can come in two ways, > either a device that has a power out pin defined, such as a regulator, or > in cases where there is no such device i.e. the power comes in from > off-board, all you have to do is add a power flag symbol to the net. This > tells DRC that you are providing power and that will sort things out. The > only oddity is that GND is also considered a power in, so that needs to > have a power flag on it somewhere as well. > > Have a read of the help document, there is a lot of useful tips in > there. > > Andy > > > > On Sat, 27 Mar 2010 12:52:56 -0700 > rocko <[email protected] <sunblaster5%40gmail.com>> wrote: > > > Huh? Not sure I understand your notes. > > The net is auto generated? Then why am I getting the ERC error on my VCC > > and GND symbols, "Power pin is not driven in" > > > > The invisible PWR pins on IC's are auto connected, really? if thats the > > case then that's pretty cool. > > > > > > On Sat, 2010-03-27 at 14:30 -0500, Karl Schmidt wrote: > > > > > > I made a few notes on this a while back - if any of this has changed > > > please let me know. > > > > > > http://wiki.xtronics.com/index.php/Eeschema#Notes_2 > > > > > > I remember weirdness of how this works - > > > ---------------------------------------------------------- > > > Karl Schmidt EMail [email protected] <Karl%40xtronics.com> > > > Transtronics, Inc. WEB http://xtronics.com > > > 3209 West 9th Street Ph (785) 841-3089 > > > Lawrence, KS 66049 FAX (785) 841-0434 > > > > > > When angry count four; when very angry, swear. --Mark Twain > > > > > > ---------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > Please read the Kicad FAQ in the group files section before posting your > question. > > Please post your bug reports here. They will be picked up by the creator > of Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute > your symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! > Groups Links > > > > > > > >
