regarding my simple problem of not being able access the asterisk gui, the answer lies within the hosts file. since i editted the network file (as described below) i should have reflected the modification in the hosts file as well. that's it. now my problem is, i have successfully created and tested extention lines w/c can call each other but i cannot make outside voip calls using sip. im using x-lite sip softphone. what other files should i look into aside from sip.conf, extension.conf? can anybody post their sip.conf and extension.conf here? btw, i tested my voip account directly from x-lite and it works so i know the problem is within asterisk itself. help please?
> ----- Original Message ----- > From: [EMAIL PROTECTED] > To: [email protected] > Subject: Re: [klug] Re: need help re: asterisk+samba > Date: Mon, 25 Dec 2006 04:11:59 +0800 > > > Currently this box is using all VOIP gateways on its outbound > routes,no PSTN gateways and no zaptel card installed,just using > ztdummy for timing. > > I just did some few tweaks and tricks on the scripts and in the kernel. > > Your welcome,hope it helps. > > Best Regards, > Jorge T. Monzor III > Telecom Analyst > Arriba Telecontact Inc. > Rosario Arcade, Limketkai Center > Cagayan de Oro City,Philippines 9000 > 1-305-508-5328 ext. 4 > URL: http://www.arribatel.com > > > Quoting p0rkch0p <[EMAIL PROTECTED]>: > > > are your voip pure IP or you have PSTN gateways through local providers? > > thanks for the Tip i'll try to simulate your config with a test server. > > > > even if recording is on you still get 40 calls simultenous?? what cards are > > you using zaptel for? do you have digium cards??? > > > > On 12/24/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> > >> Pentium(R) D CPU 2.80GHz, 1G DDR 400 codecs: g729 and gsm only both for > >> trunk and extension levels > >> Kernel: Linux 2.6.18.2 > >> Asterisk 1.2.13 > >> zaptel 1.2.11 > >> > >> I am sending traffic to three different voip providers depending on > >> certain area codes (dial plan rules),also i recompiled the kernel and > >> recompiled/updated the asterisk and zaptel pkgs, and some > >> customizations on agi scripts. That's my only recipe for on this box, > >> so far its doing smooth and stable even if monitoring and voice > >> recordings are also enabled on this box. > >> > >> Probably the issue in your case is bandwidth (not your current bw > >> provided by your ISP but bw between you and the voip provider) the more > >> you send traffic (simultaneous calls) to your lone voip provider the > >> more possible packet loss and jitter there would be, test the latency > >> between you and the voip provider and also examine the jitter (when > >> there are live calls), also try using alternate outbound routes > >> (different voip providers each route). > >> > >> Best Regards, > >> Jorge T. Monzor III > >> Telecom Analyst > >> Arriba Telecontact Inc. > >> Rosario Arcade, Limketkai Center > >> Cagayan de Oro City,Philippines 9000 > >> 1-305-508-5328 ext. 4 > >> URL: http://www.arribatel.com > >> > >> Quoting p0rkch0p <[EMAIL PROTECTED]>: > >> > >> > jorge if you don't mind, can i ask for the server specs of the trixbox > >> your > >> > running now? and what type of codec are u implementing at 50 > >> simultaneous > >> > call? on a p4 1gig running g729 i could only run like 15 at max then it > >> > begins to be choppy. > >> > > >> > On 12/22/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> >> > >> >> I have trixbox with running samba both are working perfect, by default > >> >> samba in trixbox is not enabled,issuing "setup-samba" command default > >> >> smb.conf will be generated and you may edit it to your preference > >> >> settings, in my case all are perfect for production (50+ simultaneous > >> >> calls). > >> >> > >> >> I wonder why you can't acess the web gui of your trixbox. Is httpd > >> >> running? Are you using swat? hmmmm.... can you show the httpd logs? and > >> >> also any other logs related to to this problem. > >> >> > >> >> Best Regards, > >> >> Jorge T. Monzor III > >> >> Telecom Analyst > >> >> Arriba Telecontact Inc. > >> >> Rosario Arcade, Limketkai Center > >> >> Cagayan de Oro City,Philippines 9000 > >> >> 1-305-508-5328 ext. 4 > >> >> URL: http://www.arribatel.com > >> >> > >> >> Quoting mark navarro <[EMAIL PROTECTED]>: > >> >> > >> >> > hi all. > >> >> > > >> >> > i just installed asterisk using the latest trixbox package. i > >> updated > >> >> > both the base (CentOS) os and asterisk using the built-in scripts. > >> it > >> >> > actually ran flawlessly until i installed samba also using the > >> >> > built-in script. but this somehow created a conflict and now i > >> cannot > >> >> > access my asterisk gui but i can open/browse/write to my samba > >> >> > share.btw, i also installed another hdd exclusive for samba (hdc1) > >> >> > and did the following: > >> >> > > >> >> > 1.editted mtab and fstab to include my new drive and mount > >> point. (i > >> >> > don't have problem with samba at this point.) > >> >> > > >> >> > 2./etc/sysconfig/network and changed the default hostname from > >> >> > asterisk.local to smbshare.local. > >> >> > > >> >> > 3. cat smb.conf > >> >> > > >> >> > [global] > >> >> > > >> >> > workgroup = workgroup > >> >> > > >> >> > server string = samba > >> >> > > >> >> > hosts allow = 192.168.100. > >> >> > > >> >> > max log size = 0 > >> >> > > >> >> > smb passwd file = /etc/samba/smbpasswd > >> >> > > >> >> > security = share > >> >> > > >> >> > encrypt passwords = yes > >> >> > > >> >> > unix password sync = yes > >> >> > > >> >> > passwd program = /usr/bin/passwd %u > >> >> > > >> >> > socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 > >> >> > > >> >> > username map = /etc/samba/smbusers > >> >> > > >> >> > dns proxy = yes > >> >> > > >> >> > public = yes > >> >> > > >> >> > guest account = nobody > >> >> > > >> >> > guest ok = yes > >> >> > > >> >> > browseable = yes > >> >> > > >> >> > writable = yes > >> >> > > >> >> > [cusfiles] > >> >> > > >> >> > comment = Public Files > >> >> > > >> >> > path = /public_files > >> >> > > >> >> > valid users = nobody > >> >> > > >> >> > writable = true > >> >> > > >> >> > create mask = 0700 > >> >> > > >> >> > directory mask = 0700 > >> >> > > >> >> > where did i go wrong? help please, anyone? > >> >> > > >> >> > -- > >> >> > _______________________________________________ > >> >> > Search for products and services at: > >> >> > http://search.mail.com > >> >> > > >> >> > Powered by Outblaze > >> >> > > >> >> > >> >> > >> >> > >> >> _________________________________________________ > >> >> Kagay-Anon Linux Users' Group (KLUG) Mailing List > >> >> [email protected] (http://cdo.linux.org.ph) > >> >> Searchable Archives: http://archives.free.net.ph > >> >> > >> > > >> > > >> > > >> > -- > >> > Registered Linux user number 395142. > >> > http://samuraix.cdo.ph/ , http://samuraix.servebeer.com > >> > > >> > >> > >> > >> > >> _________________________________________________ > >> Kagay-Anon Linux Users' Group (KLUG) Mailing List > >> [email protected] (http://cdo.linux.org.ph) > >> Searchable Archives: http://archives.free.net.ph > >> > > > > > > > > -- Registered Linux user number 395142. > > http://samuraix.cdo.ph/ , http://samuraix.servebeer.com > > > > > > Jorge T. Monzor III > Telecom Analyst > Arriba Telecontact Inc. > Rosario Arcade, Limketkai Center > Cagayan de Oro City,Philippines 9000 > Tel. 6388-857-2288 ext. 251 > USDID# 1-305-508-5328 ext. 4 > Toll-Free# 1-866-394-0909 > Manila# (02)-499-7293 ext. 4 > mobile:(+63)-920-898-9734 > msn: [EMAIL PROTECTED] > ym: [EMAIL PROTECTED] > URL: http://www.arribatel.com > > > _________________________________________________ > Kagay-Anon Linux Users' Group (KLUG) Mailing List > [email protected] (http://cdo.linux.org.ph) > Searchable Archives: http://archives.free.net.ph > -- _______________________________________________ Search for products and services at: http://search.mail.com Powered by Outblaze _________________________________________________ Kagay-Anon Linux Users' Group (KLUG) Mailing List [email protected] (http://cdo.linux.org.ph) Searchable Archives: http://archives.free.net.ph
