I tried this
 
ping 208.67.222.222
 
This produced similar results
 
>From 72.214.18.66 icmp_seq=41 Destination Host Unreachable
64 bytes from 208.67.222.222: icmp_seq=125 ttl=60 time=6.45 ms
 
Kind of back and forth between these two
 
Like I said before I dont know to interpret these results
 
 
Do you have any Idea about what else could make this happen?
 
 
Thanks,
Michael
 > Date: Mon, 1 Dec 2008 14:22:38 -0800> From: [EMAIL PROTECTED]> To: 
 > kplug-newbie@kernel-panic.org> Subject: Re: Connecting with CentOS 5.2> > On 
 > Mon, Dec 1, 2008 at 11:00 AM, Michael Lynch <[EMAIL PROTECTED]> wrote:> >> > 
 > Carl,> >> > Please forgive me> >> > For some reason my msn email is not 
 > correctly formatting these messages> >> > My /etc/resolv.conf was formatted 
 > as you put it but like I said> >> > I am losing formatting in these 
 > messages> >> >> >> > Cox gave me a CIDR block of 30 static IP addresses to 
 > use> >> >> >> > I just sent a ping to 68.105.28.11 and these are the 
 > results> >> > 64 bytes from 68.105.28.11: icmp_seq=20 ttl=60 time=6.13 ms> > 
 > 64 bytes from 68.105.28.11: icmp_seq=28 ttl=60 time=7.42 ms> > >From 
 > 72.214.18.66 icmp_seq=69 Destination Host Unreachable> > >From 72.214.18.66 
 > icmp_seq=70 Destination Host Unreachable> > from 72.214.18.66 icmp_seq=71 
 > Destination Host Unreachable> > 64 bytes from 68.105.28.11: icmp_seq=125 
 > ttl=60 time=6.45 ms> >> > it continued on for a while after this> >> > To me 
 > it seems as if some packets are going through and others are not> >> > 
 > although I admit I do not know how to correctly interpret these results> >> 
 > > If ;you don't have reliable connection to your nameserver, you won't> have 
 > reliable connection to anywhere else on the net. It is time to> escalate 
 > this back to Cox and tell them it is their problem.> > Alternatively, you 
 > might try using entirely different nameservers,> from Opendns. 
 > <https://www.opendns.com>> > nameserver 208.67.222.222> nameserver 
 > 208.67.220.220> > Try pinging one of these addresses and see if it responds 
 > reliably.> If so, make a new resolv.conf file using those nameservers.> > 
 > carl> -- > carl lowenstein marine physical lab u.c. san diego> [EMAIL 
 > PROTECTED]> > -- > KPLUG-Newbie@kernel-panic.org> 
 > http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-newbie--
KPLUG-Newbie@kernel-panic.org
http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-newbie

Reply via email to