Mark and JL,
I have a comment on the studs. Great planes sells a set of studs that
is 200% stronger than the original. Now, why would they do that? Because
the original do not handle the tensile strength requirement. I replaced
them on a Hapi engine where I found the studs were stripping. The new studs
from great planes where a happy solution. I find when they increase the
strength on something there is usually a reason.
Larry Bell
On Sun, Jun 14, 2015 at 12:46 PM, Mark Langford via KRnet <
krnet at list.krnet.org> wrote:
> I got my answer privately on the 10mm spark plugs. They are NGK 4629
> C7HSA. NGK also makes 8mm plugs, if anybody's wondering.
>
> Thanks,
>
>
> Mark Langford
> ML at N56ML.com
> http://www.n56ml.com
>
>
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>
