-----Original Message----- From: Donald Laverick via KRnet Sent: Tuesday, December 8, 2015 11:38 PM To: KRnet Cc: Donald Laverick Subject: Re: KR> GPASC dual-plug 10mm plugs?
Sent from my iPad Don't forget my spark plug question. Plug wire info would be good too. Mark I was using NGK C7HSA spark plugs for the secondary. I didn't have any trouble and the always looked good when inspecting them. For the wires I was using 7mm resistance wire I got from NAPA. I just used bulk wire and the need hardware. Right now I am using heads with a single plug and using the NGK equivalent to Bosch W7CC , again with 7MM resistance wire. No problems. Roger Bulla rbulla2 at wic.net Thanks, -- Mark Langford ML at N56ML.com http://www.n56ml.com _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
