I was at the airport today and in light of our recent discussions on push rods, I measured my aileron push rods. My rods measure 1 5/8" between the lock nuts. A threaded rod approx 3 inches in length should work so a bolt in the -30 size should be about right. This is ballpark so make to fit your airframe. That would make a push rod cost just under $10 each.
Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
