I just retired N40WS KR-2 and have a nice Cowling, Canopy, Diehl tri gear and a lot of hardware for the controls. Drop an email if interested. [email protected]
On Wed, May 10, 2017 at 6:32 PM, Larry Flesner via KRnet < [email protected]> wrote: > > > I was at the airport today and in light of our recent discussions on push > rods, I measured my aileron push rods. My rods measure 1 5/8" between the > lock nuts. A threaded rod approx 3 inches in length should work so a bolt > in the > -30 size should be about right. This is ballpark so make to fit your > airframe. That would make a push rod cost just under $10 each. > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/k > [email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
