Thanks everyone. As always you guys are the best. Just for grins and giggles,
I moved my instrument panel towards me an extra 2 inches so now I have close to
7 inches between the panel and the fuel tank. my plan is to hold me breath
while flying but I think the sacrifice will be worth it.. An EFIS it is....
Thanks again
Luis R Claudio, KR2S Dallas, Texas
On Friday, May 25, 2018 03:26:42 PM CDT, Ppaulvsk via
KRnet <[email protected]> wrote:
As a reminder. Dynon is one of the sponsor's for the Gathering. They are
providing two $150 gift certificates that will be drawn for.
Paul ViskBelleville Il.618-406-4705
-------- Original message --------From: Rob Schmitt via KRnet
<[email protected]> Date: 5/25/18 11:02 AM (GMT-06:00) To: KRnet
<[email protected]> Cc: Rob Schmitt <[email protected]> Subject: Re: KR>
Vacuum source in the Revmaster engine
Luis,
I am flying the Revmaster, but I do not use a vacuum drive instrument. I do
have a Dynon D6. A good solution for sure. Like John mentioned, check for room
before you install, mine is tight but worked out.
Thanks,
Rob Schmitt
KR2S N1852Z
> On May 25, 2018, at 2:56 PM, John Bouyea via KRnet <[email protected]>
> wrote:
>
> Hi Luis.
> I wanted more than needle, ball and airspeed too. I went with a Dynon D6 in
> N5391M. For me, it was easier and less expensive than a vacuum source.
> One thing to be aware of is the required depth of that device. Be sure you
> have enough room forward of your panel to mount it.
> Other instruments are available with less depth requirement and provide the
> gyro functions. The Dynon offers AOA capability in the same device and that
> is something I wanted.
> Check EBay as I found both of mine there at very substantial discounts. If
> required, you can do the software updates easily.
> Good luck!
>
> John Bouyea
> N5391M/ KR2
> OR81/ Hillsboro, OR
> 2015 KR@MMV Gathering CoHost
>
> -----Original Message-----
> Subject: KR> Vacuum source in the Revmaster engine
>
> Those that are flying the Revmaster engine in the KR... what vacuum source
> are you using? In the absence of a doable solution I am thinking of a low
> cost EFIS like the Dynon or something similar. Decision time on
> instrumentation...
> Luis R Claudio, KR2S Dallas, Texas
>
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
