I do remember this happened regularly with Aeropoxy during my wing construction. It eventually lost it's tackiness, but it sure was annoying.
I have pretty much switched to West Systems since and haven't had any issues with it. Rob Schmitt N1852Z -----Original Message----- From: KRnet <[email protected]> On Behalf Of John Bouyea via KRnet Sent: Monday, February 11, 2019 10:24 AM To: 'KRnet' <[email protected]> Cc: John Bouyea <[email protected]>; 'Mark Jones' <[email protected]> Subject: Re: KR> Aeropoxy I've used both fresh & stale AeroPoxy 2032 w/ 3660 hardner and only experienced what you describe when either temp or humidity aren't optimal. Is it cold or humid? You may want to try a heat lamp to get rid of the tackiness. Allie Palmer > On Feb 11, 2019, at 11:10, Mark Jones via KRnet <[email protected]> wrote: > I am using Aeropoxy to lay up my glass. After I laid up the bottom of the left stub wing and stabilizer the lay up remains tacky even after a week of curing. The lay up has dried hard but just has this tackiness to the surface. Any suggestions to remove the tackiness? And yes I am weighing the mix according to instructions of 100/27 by weight or 3/1 volume. > Mark Jones _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
