Kevin Stolhammer via KRnet wrote:
My memory says 72". According to page 79 of my plans, the drawing shows
all the way from the inboard edge to within about two inches of the end
of the wing (not counting the tip). It's not dimensioned, but there's a
5" deep dimension there to give chordwise depth of the cutout on the
outboard end). Apparently you need something to fasten the aft end of
the wingtip too. It's a KR....just wing it!
> I am nearly ready to cut the ailerons from the outer wing panels but I
> cannot find the length specified in the plans (KR 2)? I know that just
> because I dont see it doesnt meen its not there...
Mark Langford
m...@n56ml.com
http://www.n56ml.com
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
