Thanks. This is just a 2, so I will wing it! On Mon, Apr 6, 2020, 9:21 AM Rob Schmitt via KRnet <[email protected]> wrote:
> 72" is correct per Drawing "W2" of the KR2S plans. > > Thanks, > > Rob Schmitt > > > -----Original Message----- > From: KRnet <[email protected]> On Behalf Of Mark Langford via > KRnet > Sent: Monday, April 6, 2020 11:13 AM > To: Kevin Stolhammer via KRnet <[email protected]> > Cc: Mark Langford <[email protected]> > Subject: Re: KR> Aileron length > > > Kevin Stolhammer via KRnet wrote: > > My memory says 72". According to page 79 of my plans, the drawing shows all > the way from the inboard edge to within about two inches of the end of the > wing (not counting the tip). It's not dimensioned, but there's a 5" deep > dimension there to give chordwise depth of the cutout on the outboard end). > Apparently you need something to fasten the aft end of the wingtip too. > It's a KR....just wing it! > > > I am nearly ready to cut the ailerons from the outer wing panels but I > > > cannot find the length specified in the plans (KR 2)? I know that just > > because I dont see it doesnt meen its not there... > > Mark Langford > [email protected] > http://www.n56ml.com > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
