Hi What does it take to be taken off the BLOG I have tried several times still waiting
-----Original Message----- From: KRnet <[email protected]> On Behalf Of Phillip Matheson via KRnet Sent: Tuesday, 27 October, 2020 12:05 PM To: KRnet <[email protected]> Cc: Phillip Matheson <[email protected]> Subject: Re: KR> Riv-nuts / poly-nuts Just a thought. Drill for a ankle nut. Rivet in place. Fill the whole, thread, top of anchor nut with urethane foam?? Or similar. Then use fuel proof resin on the inside over the Anchor nut area to seal. Then the bolt with screw through the foam. Should work ok. This was a thought of mine if my same senders did the same thing. Phil Matheson Sent from my iPhone > > I'll give an update when I see how they work. > > In this case, my results may vary.......... > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. > To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
