On 10/26/2020 9:04 PM, Phillip Matheson via KRnet wrote:
Then use fuel proof resin on the inside over the Anchor nut area to seal.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have zero access to the inside. That's my dilemma. Filler cap is 7
feet out on the wing and the only hole is the one the probe installs
in. I'll do some testing with scrap material and a torque wrench to see
what torque it takes to make the inserts spin. I don't see that being a
problem installing the nuts but maybe some day to remove the bolts if
they seize in any way. Seems they would need oxygen to rust and with
anti-seize and always covered with fuel that seems remote. The bolts
when removed after 15 years looked new.
I'll keep you posted.........
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
