Larry How about going to a slightly larger metric size and retapping that hole. Mark Langford went to 10 mm WAF bolts when 3/8" were too loose. He reamed them slightly larger for the 10 mm. Just a thought. Pete Klapp
________________________________ From: KRnet <[email protected]> on behalf of Flesner via KRnet <[email protected]> Sent: Tuesday, October 27, 2020 9:40 AM To: Flesner via KRnet <[email protected]> Cc: Flesner <[email protected]> Subject: Re: KR> Riv-nuts / poly-nuts On 10/27/2020 8:05 AM, Flesner via KRnet wrote: > I have zero access to the inside. That's my dilemma. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ I'm surprised that no one has suggested just rotating the sender and drilling and tapping new holes. I'm holding that one in reserve. Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
