On 8/11/2026 12:23 PM, gary19521--- via KRnet wrote:
Are the Dan Diehl wing skins airfoil the RAF 48, or the newer airfoil
that was developed a while back?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The Diehl skins would be the RAF48 airfoil. I don't recall that the
"new" wing design was ever offered in pre-molded skins, just drawings
and dimensions.
I'm also not sure how you'd ever get a set of wings from one KR to fit
another KR without modifications. The wings are built in stages. Part
2 (center section)is matched to part 1 (fuselage) and part 3 (outer
skins) are matched to part 2 (center section). If there are still
builders out there that are still in the "boat" stage, there is a method
to build a perfectly rigged KR without using the process in the plans
using just bubble levels. If interested, hit me at [email protected]
. Using two bubble levels I was able to build one wing at a time that
later measured to within 1/10 of a degree from one side to the other
with a digital level.
Larry Flesner
--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet