I have completed Wings with the new air foil. I also have a tail section with the new tail section airfoil. In all kinds of other stuff. Like Landing gear and a complete brake system. Complete dual thick flight control. I live 70 miles west of Mount Vernon, where the KR gatherings gonna be. Just on the other side of St. Louis. Sent from my iPhone
> On Aug 11, 2026, at 2:59 PM, Larry Flesner via KRnet <[email protected]> > wrote: > > >> On 8/11/2026 12:23 PM, gary19521--- via KRnet wrote: >> Are the Dan Diehl wing skins airfoil the RAF 48, or the newer airfoil that >> was developed a while back? > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > The Diehl skins would be the RAF48 airfoil. I don't recall that the "new" > wing design was ever offered in pre-molded skins, just drawings and > dimensions. > > I'm also not sure how you'd ever get a set of wings from one KR to fit > another KR without modifications. The wings are built in stages. Part 2 > (center section)is matched to part 1 (fuselage) and part 3 (outer skins) are > matched to part 2 (center section). If there are still builders out there > that are still in the "boat" stage, there is a method to build a perfectly > rigged KR without using the process in the plans using just bubble levels. If > interested, hit me at [email protected] . Using two bubble levels I was > able to build one wing at a time that later measured to within 1/10 of a > degree from one side to the other with a digital level. > > Larry Flesner > > -- > KRnet mailing list > [email protected] > https://list.krnet.org/mailman/listinfo/krnet -- KRnet mailing list [email protected] https://list.krnet.org/mailman/listinfo/krnet

