You’re so right, larry. That’s why I have a few lunch that would fit right over it. Lol Sent from my iPhone
> On Aug 11, 2026, at 7:48 PM, Paul V <[email protected]> wrote: > > I have completed Wings with the new air foil. > I also have a tail section with the new tail section airfoil. In all kinds > of other stuff. Like Landing gear and a complete brake system. > Complete dual thick flight control. > I live 70 miles west of Mount Vernon, where the KR gatherings gonna be. Just > on the other side of St. Louis. > Sent from my iPhone > >> On Aug 11, 2026, at 2:59 PM, Larry Flesner via KRnet <[email protected]> >> wrote: >> >> >>>> On 8/11/2026 12:23 PM, gary19521--- via KRnet wrote: >>> Are the Dan Diehl wing skins airfoil the RAF 48, or the newer airfoil that >>> was developed a while back? >> >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> >> The Diehl skins would be the RAF48 airfoil. I don't recall that the "new" >> wing design was ever offered in pre-molded skins, just drawings and >> dimensions. >> >> I'm also not sure how you'd ever get a set of wings from one KR to fit >> another KR without modifications. The wings are built in stages. Part 2 >> (center section)is matched to part 1 (fuselage) and part 3 (outer skins) are >> matched to part 2 (center section). If there are still builders out there >> that are still in the "boat" stage, there is a method to build a perfectly >> rigged KR without using the process in the plans using just bubble levels. >> If interested, hit me at [email protected] . Using two bubble levels I >> was able to build one wing at a time that later measured to within 1/10 of a >> degree from one side to the other with a digital level. >> >> Larry Flesner >> >> -- >> KRnet mailing list >> [email protected] >> https://list.krnet.org/mailman/listinfo/krnet -- KRnet mailing list [email protected] https://list.krnet.org/mailman/listinfo/krnet

