On Mon, Jan 28, 2002 at 12:07:38AM -0800, Paul H. Gusciora wrote: > Are KX-TD programs #423 #427 #428 #429 focused on the S/T bus interaction > between the KX-TD and the LEC?
I believe this to be true. > Or do you think that the KX-TD systems can drive an ISDN telephone on one > of the extensions? I have no reason to believe this. I suppose it could be true, I do know that the digital PT sets use an ISDN-like signaling protocol. > If NI-1 is a standard, I wonder if there are a set of standard ordering > sheets? Maybe one could purchase a document from Bellcore (or whatever > they are called these days)? The document might be cheaper than the time > wasted trying to achieve a mind meld with the LEC ordering representative. They have standard "capability sets" that apply to all the LECS that sell NI-1 ISDN. Something with the "S1" capability set gives you voice and data calling on both B channels. It also gets you two SPIDS and two DNs. For a simple setup, that might be all you need. As soon as you start getting more than two DNs, you walk out of the standard capability sets and into the ISDN wilds. If I had just wanted to replicate two simple phone lines with the BRI, it would probably have been pretty easy. Since I wanted to more complicated things, well, that made it more complicated. If the KX-TD system had *any* diagnostic tools showing what the heck was going on with respect to the ISDN signaling, that would be a huge step in the right direction. Do any of the dealers on this list with access to the Panasonic programming/debugging software know if it does anything useful with ISDN signal debugging? -Kurt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
