I don't know if this is the one but there is a 990 code at 5,9 (or is it 9,5?) In the programming software they call it "special dial tone" for station features and the default is enable. I always disable that one, it drives me nuts, whenever any feature is enabled, such as call waiting, etc.
Charles ----- Original Message ----- From: "John Burk" <[EMAIL PROTECTED]> To: "Harry from Select" <[EMAIL PROTECTED]> Cc: "Charles Patterson" <[EMAIL PROTECTED]>; "Bob [EMAIL PROTECTED]" <[EMAIL PROTECTED]>; "'KXT Help Forum'" <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 10:27 AM Subject: Re: KX-T: XDP to CO immediately? > Harry, or any others.....Where or how do you adjust the timer for the stutter > tone? I don't recall (at this moment) where that would be in programming. 990? > > Best Regards > > -------------------------------------------------------------------------- ------------------------------- > > Harry from Select wrote: > > > There is a timer that will adjust that stutter tone so that it is a lot more > > seamless > > Also the stutter tone should not affect the terminal from dialing out, > > unless the terminal is set > > to dial out with lightning speed > > > > ----- Original Message ----- > > From: "Charles Patterson" <[EMAIL PROTECTED]> > > To: "Bob [EMAIL PROTECTED]" <[EMAIL PROTECTED]> > > Cc: "'KXT Help Forum'" <[EMAIL PROTECTED]> > > Sent: Tuesday, June 03, 2003 12:10 AM > > Subject: Re: KX-T: XDP to CO immediately? > > > > > The pick up dialing is not fast enough. > > > If you put a proprietary extension on the line as well (even an analog > > > KXT7050 for instance) AND set that phone for immediate co access, then it > > > will grab the line right away. You would not use XDP, as the phone (dig > > or > > > ana) AND the cc terminal will have to be parallel extensions. AND you > > > cannot take the proprietary phone away. > > > > > > Other choice as mentioned is reprogram the cc terminal to dial 9. > > > Most CC companies I've dealt with will talk you through it over the phone > > > for no charge. > > > > > > Other choice is to share it with a fax line. Since faxes and cc > > verification > > > are rather short duration, they can usually co-exist without too much > > > conflict. > > > > > > Charles > > > > > > > > > ----- Original Message ----- > > > From: "Bob [EMAIL PROTECTED]" <[EMAIL PROTECTED]> > > > To: "Harry from Select" <[EMAIL PROTECTED]> > > > Cc: "Michael Karaman" <[EMAIL PROTECTED]>; "'KXT Help Forum'" > > > <[EMAIL PROTECTED]> > > > Sent: Monday, June 02, 2003 10:57 PM > > > Subject: Re: KX-T: XDP to CO immediately? > > > > > > > > > > That's exactly what I described that I've done. Problem is, you get a > > few > > > bursts of intercom dial > > > > tone before hitting the outside line. > > > > > > > > Bob > > > > > > > > Harry from Select wrote: > > > > > Or you can refer to the manual and perform what's called " hot line > > pick > > > up" > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Michael Karaman" <[EMAIL PROTECTED]> > > > > > To: "'Bob [EMAIL PROTECTED]'" <[EMAIL PROTECTED]>; "'KXT Help Forum'" > > > > > <[EMAIL PROTECTED]> > > > > > Sent: Monday, June 02, 2003 10:15 PM > > > > > Subject: RE: KX-T: XDP to CO immediately? > > > > > > > > > > > > > > > Reprogram the credit card terminal to dial 9, first. This will get > > rid > > > of > > > > > your problem. Make sure to do a 790 on the extension to clear any > > > > > programming you have done. > > > > > > > > > > Michael Karaman > > > > > President > > > > > The Phone Network, Inc. > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > > Of > > > Bob > > > > > [EMAIL PROTECTED] > > > > > Sent: Monday, June 02, 2003 9:26 PM > > > > > To: 'KXT Help Forum' > > > > > Subject: KX-T: XDP to CO immediately? > > > > > > > > > > > > > > > One more question. I'm trying to hook up a credit card machine to a > > > > > KX-TD816, on a spare XDP port. > > > > > I've got the port set so that when going off-hook, it goes straight > > to > > > an > > > > > idle CO line. However, > > > > > there are a couple quick beeps from the KX-TD box before getting the > > > outside > > > > > CO dialtone. The > > > > > credit card terminal starts dialing the minute it detects any sort of > > > tone, > > > > > and so dials prior to > > > > > the KSU handing it a CO line. > > > > > > > > > > Is there any way of disabling the KSU's internal dialtone for JUST ONE > > > LINE? > > > > > Or another workaround? > > > > > > > > > > Bob > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
