OK, while we're on the subject... Customer with a TDA200 and one T1 complains of echo on some calls. I have to meet with provider on Monday, they think it might be in the card. Could clocking have anything to do with this case?
Charles ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Friday, May 07, 2004 4:18 PM Subject: Re: KX-T: Echos when making / receiving some calls > sorry about the last email, I'm resending: > > Sounds like a timing issue between you and the carrier. In the programming of > the TSW card on the KX-TD500, you should be clocking from one span and as a > slave (external clock) to that span. You should not be generating your own > clocking. Make sure the TSW card is clocking from the span that you want, and the > other spans are listed in priority to the first span. This will setup the PBX > to clock with the other spans. You should not receive any clocking from the > other spans. It could be that the clocking between this span and the other > carriers is slightly off, thus causing a jitter in time between the spans. Check > to see if you can switch the clocking to one of the other T1's and see if the > problem appears on the other spans. > > Steve L. Martin > Surf Side Sound, Inc. > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
