Talk about frustrating...I set up a phantom ext #141 (using the Programmator tool) (left that part out, sorry), and I even tried making a mailbox 141, left it a message, and no luck. However, I think something isn't quite working right though. With a phantom extension, I should be able to dial it, correct? Because when I do, I get "Not Valid".
Any ideas? Thanks all! --Brian -----Original Message----- From: Charles Patterson [mailto:[EMAIL PROTECTED] Sent: Thursday, January 06, 2005 7:51 PM To: McCann, Brian; [email protected] Subject: Re: KX-T: TVS mailboxes without a real extension If there is no phantom ext or real extension, then the TVS does not think that an extension exists so it will not light the mw lamp (I think), also the ksu will not allow vm transfer (VTR) because it too does not think there is such a number. If you have phantoms set up, then it should work as you want. It is helpful to keep the box numbers and the phantom numbers the same, although I suppose you can link 901 and 141 if you need to. One thing to check is do not set "all calls transfer to mailbox" in the tvs mailbox settings. If you do then it will ignore the mw lamps. There are other ways to do that, for instance turn on "call blocking" from inside the mailbox auto attendant settings (by touch tone, not by pc). Charles ----- Original Message ----- From: "McCann, Brian" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, January 06, 2005 6:06 PM Subject: RE: KX-T: TVS mailboxes without a real extension Ok...I've tried this, but it doesn't seem to work. I've set a DSS button on my phone to be a Message Waiting button ext 141 using the Programmator (as my manual does not have the correct information to do it by hand), I've set mailbox 901 to ext 141, left a message in the box, no lights light up. I've tried manually turning on the lamp by dialing 701141, and I get "MW Not Accepted". I know I must be missing something...any ideas? Thanks all, --Brian McCann -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of McCann, Brian Sent: Thursday, January 06, 2005 4:00 PM To: [email protected] Subject: KX-T: TVS mailboxes without a real extension Hi all...I've gotten most of the TVS system we have here programmed the way we need it except for one thing. Is it possible to have a mailbox that is not associated with an extension appear on several phones or DSS consoles and have the button for it light when there is a message? I thought this would be possible perhaps through the use of phantom extensions, but I'm not sure. As usual, any and all help is greatly appreciated! Thanks, --Brian -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* Brian McCann Network & Systems Administrator, Networks & More! / K12USA [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> www.andmore.com <http://www.andmore.com/> , www.k12usa.com <http://www.k12usa.com/> _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
