Zim: T1 is wired as an "RJ45" 8 pin jack, with the designation of RJ48C. pins 1,2 RX pins 4,5 TX. Pin 1 is Ring RX, Pin 2 is Tip RX, Pin 4 is Ring (R1) TX, pin 5 is Tip (T1) TX. A straight thru patch cable is required, so that the pinouts do not reverse in the cable. This is known as a x-over cable in the network world. An 8-pin silver satin cable would have the tab of the plug on the seam side of one end, with the tab of the other plug on the smooth side of the silver satin. If the smart jacks are wired correctly, end to end. The above described patch cables will provide the desired connection. Essentially, the TX from the near end of the smart jack should connect to the RX on the far end, and vice versa. Steve L. Martin Pres./CEO _Surf Side Sound, Inc._ (http://www.surfsidesound.com/)
************************************** See what's new at http://www.aol.com _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
