At 09:21 PM 2/17/2009, Benjamin Hirsch wrote: >Hi, > >I really enjoy following this group as I pick up quite a bit from you > >professionals out there. Now I have a question of my own. > >I recently changed locations and am trying to reconnect the Panasonic > >KX-TVA50 to the KXTD-1232. However I am a bit confused as to how to > >connect the ports. I believe the 2 ports are really for four > >extensions. Now as I normally punch down 4 wires then skip 2 posts and > >punch down another 4 wires for the standard extensions; do I do the > >same here as well? Or do I only punch down 2 wires then skip 4 and > >repeat for the next 3 extensions? I appreciate any help as you guys > >always came through in the past.
If your VM is out of the box and you didn't add any 50x cards, it has 2 jacks labeled 1 and 2. You plug a 4 conductor cable into the odd jack and wire the 2nd pair of it to any 2nd pair of a digital port in the TD. If you plan on adding the 50x card later for more VM ports, make sure you leave room for the expansion (ie pick port 15 and reserve 16) and again only use the odd numbered jacks. The installation manual shows examples of wiring at 1.2.2 Carl _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
