I'm replacing a Panasonic 616 that has 6 lines and 7 ext's with a 1232 that I just
picked up. I'm trying to do some planning before I get the installation manual.
1. If all my present phones are analog and I use a 3rd party software to program the
1232, do I still need at least one digital system phone?
2. On my 616 all the incoming lines plug in RJ's, one for each line. On the 1232 the
incoming CO's are marked with two lines for each incoming CO, will each RJ be feed by
2 incoming CO's.
3. On my 616 each ext is plugged into an RJ, on the 1232 there are no RJ jacks for
this purpose, but only 2 Amphenol jacks with each jack serving a group of extenstions.
Will I need a special cable to plug my ext's into.
4. I have a KXTD50 voice mail, I assume it also will plug into one of the jacks I
mentioned in #3 above.
Thanks for any help in these intials steps.
Rick McCoy
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
