Have you tried powering off the machine, using bootmode config="factory-default" from the alom and then powering up?
I had a crashed hypervisor on a t6300 blade and this was the only way i could find to fix it. -Steve Goldthorpe ----- Original Message ---- From: Armando Galibardi <[email protected]> To: ldoms-discuss at opensolaris.org Sent: Friday, 28 March, 2008 1:54:08 PM Subject: [ldoms-discuss] Reset LDOM Configuration Hi all, We've a problem with LDOM configuration. Our T5220 was broken and we had changed the motherboard. After that, we got a strange LDOM configuration on the machine and so we had tried to reset the LDOM configuration to the "factory-default" configuration but nothing happens. So we've tried to remove the LDOM sofware, re-install it and then I issue the "ldm list " command and see that some VCPU are not present on the primary-domain ( I see 48 VCPU but with 8core with 8 threads/core on the T5220 I had a totally of 64 VCPU). How can I recovery my machine. Is there any other procedure to reset my LDOM and start by scratch? Thanks Armando -- This message was posted from opensolaris.org _______________________________________________ ldoms-discuss mailing list ldoms-discuss at opensolaris.org http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss
