"N. Sean Timm" wrote: > > I wrote: > > The ping just hangs and does nothing. I haven't timed how long it > > hangs, but I know it hangs for more than a minute. > > > > So, I'm getting further, but I still can't get through to the internet > > yet... > > Some more info...I did an "ip route" on my working March image and the > non-working new image. > ======================== > Old (working) route*: > 192.168.1.1 dev eth1 scope link > 123.45.67.90 dev eth0 scope link > 123.45.67.88/29 dev eth0 proto kernel scope link src 123.45.67.90 > 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.1 > 127.0.0.0/8 dev lo scope link > default via 123.45.67.89 dev eth0 > > New (non-working) route*: > 123.45.67.88 dev eth0 scope link > 123.45.67.90 dev eth0 scope link > 192.168.1.0 dev eth1 scope link > 192.168.1.1 dev eth1 scope link > 192.0.0.0/8 dev eth1 proto kernel scope link src 192.168.1.1 > 127.0.0.0/8 dev lo scope link > 192.0.0.0/3 dev eth0 proto kernel scope link src 123.45.67.90 > Default via 123.45.67.89 dev eth0 > ======================== > > Ipmask also appears to be returning a different number than my working > image was setup with. When I do an "ip addr" on my working image, I get > eth0 with inet 123.45.67.90/29. On the non-working image, I get eth0 > with inet 123.45.67.90/3. > > I haven't done any custom tweaking of my routing path. This is the > route that the network script laid out with each image. It's also the > only thing keeping me from using the latest development image of Oxygen, > so any help would be *greatly* appreciated! :) > > Thanks! > - Sean T. > > *IPs changed to protect the innocent
We can get you up and running. I'd say you're close. Remind us of your setup... Is it the ususal: One isp connected to your LRP, not using dhcp, which does NAT for an internal LAN? What I'd like for you to do at this point is to post the output of the following commands run on the Oxygen-051401 image. It'd be best if you tried to get your system running with 051401. That's the release that Dave and I debugged thoroughly: ifconfig -a netstat -rn cat /etc/network.conf Where I'm at with this is I'm having difficulty understanding where the duplicate entries are coming from. Because the entire network gets setup using the data in /etc/network.conf, it'll be good to start there. I'm also too old to appreciate ip addr show yet :) Good Luck, Matt _______________________________________________ Leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
