Mike Noyes wrote:
> 
> At 2002-02-18 05:21 -0800, Mike Noyes wrote:
> >I have a meeting this week with SST distributor Symmetry Electronics. They
> >are providing me with a 8MB unit, so my father can try to create a
> >jumper/switch that enables/disables WP.
> >
> >The people at SST have indicated that WP is possible. It looks like the
> >Apacer representative below is saying the same thing. A hardware change is
> >needed. Specifically, creation of a jumper that connects pin 62 of the
> >LD017 controller chip to ground is needed to use WP.
> 
> Everyone,
> I just acquired an 8MB ADM (SST58SM008-70-C-FSI). There are two solder
> points at the top of the module labeled R8. They appear to be too close
> together to allow for a jumper, but a remote switch configuration may work.


Neat, I just saw this, so ignore my other post a minute ago asking
what happened.

Well, there's no R8, that's good.  That's what we concluded from the 
specs and our discussions.  I look foward to seeing some pictures of
your switch.  It'll be neat to see if you can fit it all on the ADM.

Best,
Matthew

_______________________________________________
Leaf-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-devel

Reply via email to