Hello Erich, I took a look at the driver source, but it looks like it also need a /dev/wd entry to function. Looking at the Bering watchdog source (which is a very basic implementation looking only at /dev/watchdog) I don't see how this can work. I also think that loading a driver in /etc/init.d/watchdog is not the right place to do it. Modules should be load in /etc/modules.
Do you also need to set some /proc entries? Can they be set without interfering the normal softdog driver? Or is this something that should be placed in the documentation? Regards, Eric Spakman > Hi folks > > Some time ago I posted a request to include support for the pcengines wrap > board here. Unfortunately there has not been much of an echo. Could the > Bering crews please tell me if they would consider to include the necessary > modules and mods into the base line. > > Basically there are 2 prerequisites. > > - add module support for the wd1100 watchdog driver > - modularise the softdog driver and add loading of the corresponding > drivers to to /etc/init.d/watchdog > > I have both mods available. > > Thanks for the feedback > > Erich > > THINK > Püntenstrasse 39 > 8143 Stallikon > mailto:[EMAIL PROTECTED] > PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16 > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > > _______________________________________________ > leaf-devel mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-devel > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
