On Mon, 2002-07-22 at 09:28, Brooke, Thomas wrote: > > I'm trying to setup Bering 1.0 rc3 to use ppp for the external net through > an internal serial modem. > > The main problem appears to be that Bering does not recognize the modem on > startup. I'm hoping someone can point out the [obvious] step I'm > overlooking. > > Symptoms/Behavior: > > On startup, Bering detects and configures eth0 (internal iface) just fine. > /var/log/syslog reports that ttyS00 and ttyS03 both exist (these are on the > motherboard). > However, it does NOT detect the internal modem: SupraExpress 288i (ISA). > > Am I just being stupid, and missing a module or some module options? (I > tried generic-serial.o, with no options, but it didn't help).
Thomas, This modem is ISA PNP. Have you disabled PNP, and configured it to use a standard serial port? SupraExpress 288i PNP SupraExpress 288i PNP Voice SupraExpress 288i Multinat'l Voice http://www.sonicblue.com/support/diamond/default.asp?menu=support&submenu=Legacy_Modems&item=faqs&product=SupraExpress_288i_PnP#1-14 -- Mike Noyes <[EMAIL PROTECTED]> http://sourceforge.net/users/mhnoyes/ http://leaf-project.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
