Hmmm. Hadn't thought about that. I just figured it "had to be" PnP configured.
I will try disabling PnP on the modem, and manually configuring the io & irq. The url reference is perfect. Thanks. -- Thom Brooke. >On Mon, 2002-07-22 at 09:28, Brooke, Thomas wrote: >> >> I'm trying to setup Bering 1.0 rc3 to use ppp for the external net through >> an internal serial modem. >> >> The main problem appears to be that Bering does not recognize the modem on >> startup. I'm hoping someone can point out the [obvious] step I'm >> overlooking. >> >> Symptoms/Behavior: >> >> On startup, Bering detects and configures eth0 (internal iface) just fine. >> /var/log/syslog reports that ttyS00 and ttyS03 both exist (these are on the >> motherboard). >> However, it does NOT detect the internal modem: SupraExpress 288i (ISA). >> >> Am I just being stupid, and missing a module or some module options? (I >> tried generic-serial.o, with no options, but it didn't help). > >Thomas, >This modem is ISA PNP. Have you disabled PNP, and configured it to use a >standard serial port? > >SupraExpress 288i PNP >SupraExpress 288i PNP Voice >SupraExpress 288i Multinat'l Voice > >http://www.sonicblue.com/support/diamond/default.asp?menu=support&submenu=L egacy_Modems&item=faqs&product=SupraExpress_288i_PnP#1-14 > >-- >Mike Noyes <[EMAIL PROTECTED]> >http://sourceforge.net/users/mhnoyes/ >http://leaf-project.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
