There is an irq "conflict": both ttyS01 and ttyS03 use irq 3 (I believe this is "normal" DOS/Win behavior for COM2/COM4). However, the io ports are distinct.
RH 7.1 does not seem to have difficulty telling them apart (but Bering != RH, so I'll take a look at this.) Thanks. -- Thom Brooke. >On Mon, 2002-07-22 at 09:28, Brooke, Thomas wrote: >> >> I'm trying to setup Bering 1.0 rc3 to use ppp for the external net through >> an internal serial modem. >> >> The main problem appears to be that Bering does not recognize the modem on >> startup. I'm hoping someone can point out the [obvious] step I'm >> overlooking. > >Thomas, >Have you tried disabling the serial ports on the motherboard? There may >be an IRQ/port address conflict with the internal modem. > >-- >Mike Noyes <[EMAIL PROTECTED]> >http://sourceforge.net/users/mhnoyes/ >http://leaf-project.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
