Not all Prism cards are born equal. :-) How everything performs depends on the hardware and firmware used. The one I use and test come from Teletronics/Zcomax (XI-300) and Demarctech. I prefer to use PCMCIA-PCI adapter instead of PLX (I use the one from Teletronics).
I know that D-Link 650 (not the plus version, which is based on another chipset) gives problems for some people, but I suspect it may depend on the motherboard used. Beware of the 200mw Senao cards which recently appeared on the market. They are for light office use only and quickly overheat. Zachariah Mully wrote: > > Vladimir- > Is there a problem with PLX based cards? Just wondering because I > picked up a set of USR prism based cards with PLX PCI adapters (model > 2445, $80 for two, one with an external antenna on a 4ft extension, from > TigerDirect) with the intention of using them with WISP. I was going to > start working on the node tonight, but would greatly appreciate any tips > for working with these cards. > > Thanks, > Zack > > On Tue, 2002-07-23 at 09:24, Vladimir I. wrote: > >>Do you know if this card utilizes something like PLX adapter or has an >>PCMCIA-PCI bridge? >> >>Basicly, please tell the model of the card. >> > > > -- Best Regards, Vladimir Systems Engineer (RHCE) ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
