Yes, sure I wasn't specific. Cards sold by DemarcTech are completely different design than XI-300.
Symbol also has 100mW Spectrum24 Prism-based cards; I might be wrong but I think that DemarcTech cards are based on the same design. Tony wrote: > Vlad > > Thanks for the update, also I can tell you that the card from TT are not > exactly the same as the one s from Zcomax/Demarc. We have a level of > quality the cards must meet and pay for this service, this will be very > prevalent on the 200mW cards. FYI we also have the PCMCIA adaptors > available. > > Also yes I can 100% confirm the heating problem on the Senao cards, we > found this out while doing FCC testing on our cards. We test many while > we where there, we notices the 200mW Senao droped to 110mW when they got > hot. > > Sincerely > Tony Morella > Demarc Technology Group > Office: 908-996-7995 > Cell: 908-246-9170 > Fax: 908-847-0202 > email: [EMAIL PROTECTED] > http://www.demarctech.com > Wireless Solution Provider > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Vladimir I. > Sent: Tuesday, July 23, 2002 10:30 AM > To: Zachariah Mully > Cc: [EMAIL PROTECTED] > Subject: Re: [leaf-user] WISP and orinoco wireless? > > > Not all Prism cards are born equal. :-) How everything performs depends > on the > hardware and firmware used. The one I use and test come from > Teletronics/Zcomax > (XI-300) and Demarctech. I prefer to use PCMCIA-PCI adapter instead of > PLX (I > use the one from Teletronics). > > I know that D-Link 650 (not the plus version, which is based on another > chipset) > gives problems for some people, but I suspect it may depend on the > motherboard used. > > Beware of the 200mw Senao cards which recently appeared on the market. > They are > for light office use only and quickly overheat. > > Zachariah Mully wrote: > >>Vladimir- >> Is there a problem with PLX based cards? Just wondering because > > I > >>picked up a set of USR prism based cards with PLX PCI adapters (model >>2445, $80 for two, one with an external antenna on a 4ft extension, >>from >>TigerDirect) with the intention of using them with WISP. I was going > > to > >>start working on the node tonight, but would greatly appreciate any > > tips > >>for working with these cards. >> >>Thanks, >>Zack >> >>On Tue, 2002-07-23 at 09:24, Vladimir I. wrote: >> >> >>>Do you know if this card utilizes something like PLX adapter or has an >>>PCMCIA-PCI bridge? >>> >>>Basicly, please tell the model of the card. >>> >> >> >> > > -- Best Regards, Vladimir Systems Engineer (RHCE) ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
