Craig,
On Tue, 03 Sep 2002 15:41:13 MST Craig wrote: > Hi folks, > I tried adding another Linksys LNE100TX NIC to service what will be my > DMZ, and Bering gives me an error message (failure) when it tries to > configure the NIC's. As Ray stated, the exact error message with a bit of context would help debug the problem. A copy of /etc/network/interfaces and the output of "ip route" might be useful too, in case it's a network setup or routing issue. > My box works great without the third NIC. I tried > adding three different versions of the same Linksys card (Versions 2, > 4.1, & 5.1) thinking they all could use the tulip driver, all live in > harmony...but not a chance. The cards I have use now are Version 5.0. Am > I missing something? Thank you. After trying Ray's suggestions, the following output might help shed light on the problem if it's a hardware or kernel module issue: cat /proc/pci cat /proc/interrupts cat /proc/ioports I bet it's something simple, we just need more info to help out. --Brad ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
