On Tuesday 03 September 2002 17:41, Craig wrote: > Hi folks, > I tried adding another Linksys LNE100TX NIC to service what will be > my DMZ, and Bering gives me an error message (failure) when it tries > to configure the NIC's. My box works great without the third NIC. I > tried adding three different versions of the same Linksys card > (Versions 2, 4.1, & 5.1) thinking they all could use the tulip > driver, all live in harmony...but not a chance. The cards I have use > now are Version 5.0. Am I missing something? Thank you.
Linksys won't seem to stay with a consistant tulip driver. I know of people running ~13 interfaces with the DEC tulip chipset. But I'll agree with the others in that your problem is likely that the box is running out/conflicting of irq's or io ports or a pci bus problem. -- ~Lynn Avants aka Guitarlynn guitarlynn at users.sourceforge.net http://leaf.sourceforge.net If linux isn't the answer, you've probably got the wrong question! ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
