Please send me output of /proc/interrupts
Andy Henckel wrote:
Indeed... I have build Karlnet Flashrom units before, and I used the parts from one I hadn't put together. So I think it is a Richo based one. It finds the card just fine.. but doesn't bring up the AP properly. I am using the partition based installation 2426. I tried one from your site.. 1.3.1p26 but it seems to have some differences. 1.3.1p26 would tell me a TX error all the time. /start
root: ifup: Bringing up interface netcs0 x
x cardmgr[2000]: socket 0: Zcomax XI-325H 200mW x
x cardmgr[2000]: executing: 'modprobe hostap_crypt' x
x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x
x kernel: hostap_crypt: registered algorithm 'NULL' x
x cardmgr[2000]: + Using /modules/hostap_crypt.o x
x cardmgr[2000]: executing: 'modprobe hostap_crypt_wep' x
x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x
x kernel: hostap_crypt: registered algorithm 'WEP' x
x cardmgr[2000]: + Using /modules/hostap_crypt_wep.o x
x cardmgr[2000]: executing: 'modprobe hostap' x
x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x
x cardmgr[2000]: + Using /modules/hostap.o x
x cardmgr[2000]: executing: 'modprobe hostap_cs' x
x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory
kernel: hostap_cs: hostap_cs.c 0.0.0 2002-05-16 (SSH Communications Secu x
x kernel: hostap_cs: (c) SSH Communications Security Corp <[EMAIL PROTECTED]> x
x cardmgr[2000]: + Using /modules/preferred/pcmcia/hostap_cs.o x
x kernel: hostap_cs: setting Vcc=33 (constant) x
x kernel: hostap_cs: CS_EVENT_CARD_INSERTION x
x kernel: prism2_config() x
x kernel: hostap_cs: setting Vcc=50 (from config) x
x kernel: CISTPL_MANFID: 0xd601, 0x0005 x
x kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) x
x kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 x
x kernel: io->flags = 0x0046, io.base=0x0000, len=64 x
x kernel: hostap_cs: index 0x01: Vcc 5.0, irq 7, io 0x0100-0x013f x
x kernel: hostap_cs: Registered netdevice netcs0 x
x kernel: prism2_hw_init() x
x kernel: prism2_hw_config: initialized in 17306 iterations x
x kernel: netcs0: NIC: id=0x800c v1.0.0 kernel: netcs0: PRI: id=0x15 v1.1.1 x
x kernel: netcs0: STA: id=0x1f v1.5.6 x
x cardmgr[2000]: executing: './network start netcs0 0' x
x cardmgr[2000]: + iwconfig netcs0 mode MASTER x
x cardmgr[2000]: + iwconfig netcs0 channel 1 x
x cardmgr[2000]: + [: auto: unexpected operator x
x cardmgr[2000]: + iwconfig netcs0 key OFF x
x cardmgr[2000]: + iwconfig netcs0 essid "ZCASA-DIST" x
x cardmgr[2000]: + iwconfig netcs0 nick "ZCASA-WISPDIST" x
x cardmgr[2000]: + iwpriv netcs0 maccmd 0 x
x cardmgr[2000]: + iwpriv netcs0 maccmd 4 x
x kernel: netcs0: Deauthenticate all stations x
x root: ifup: Bringing up interface netcs0 x
x kernel: netcs0: prism2_open Then after a little while it does this.. kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: CNFWEPFLAGS reading failed x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x
x kernel: hfa384x_cmd: timeout on waiting pending TX x
x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
What do you think? You could access the unit if you like... 64.25.142.172
root
I'll try swaping cards again. I have tried all 3 different firmware revisions for the card. Thanks so much, Andy
________________________________
From: Vladimir Ivaschenko [mailto:[EMAIL PROTECTED] Sent: Tue 5/18/2004 3:18 AM To: Andy Henckel Cc: [EMAIL PROTECTED] Subject: Re: [leaf-wisp] Wireless
I use WISP-Dist myself with Demarctech cards and they used to work fine.
You use somekind of PCMCIA-PCI adapter?
Andy Henckel wrote:
Hello,
I setup wispdist on a pII350 that I had laying around the basement this weekend. After grinding away for some time, I finally got everything into place... or at least the illusion thereof.
My problem is this: I have Demarctech card. And it won't work. I tried orinoco card.. but AP mode is unsupported?
After reading the wireless thread on the list archive, I upgraded the 1.4.9 station firmware to 1.5.6 (primary 1.0.1 to 1.1.1)
And it still won't work. I will try to upgrade to 1.7.4 or downgrade back to 1.5.6 with primary of 1.0.1.
Any suggestions?
What happens is very strange. I reboot the dist, and then with my laptop, I can see the network when I scan for AP's. As soon as I try to connect to the AP, I cannot. And then it disappears alltogether, until another reboot. Although it's not like the dist is locking up or anything.
Thanks in advance.
Andy Henckel Transaria Missoula, MT.
------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id%62&alloc_ida84&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
