Dumb question. What port does ospfd listen on. I cannot seem to find it anywhere.
Ray On 14 Jun 2004 at 14:26, Vladimir Ivaschenko wrote: > Hi Ray, > > Please do "show ip ospf neigh" command in ospfd command line. It will > show if there are any adjacencies. > > Also "deb ip ospf hello" might be useful - you should see that there > are HELLOs received from the remote side. > > Ray Gwinn wrote: > >>Note that if OSPF is working you will have routes with "proto zebra" in the > >>list. > > > > > > Is the above true when no other nodes are visible for zebra to route to? On > > a test bench system, it always shows "proto kernel". Again, there are no > > other nodes visible to my test bench node. > > > > Using ps, I see that both zebra and ospfd are running. > > > > The zebra log is empty. The ospfd log is below. Does this look normal to > > you? > > > > Ray > > > > 2004/06/09 00:20:31 OSPF: ASBR[Status:1]: Update > > 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Update > > 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Already ASBR > > 2004/06/09 00:20:31 OSPF: interface 10.0.100.1 join AllSPFRouters Multicast > > group. 2004/06/09 00:20:31 OSPF: interface 199.110.204.253 join > > AllSPFRouters Multicast group. 2004/06/09 00:20:32 OSPF: LSA: > > AS-external-LSA was not originated. 2004/06/09 00:20:32 OSPF: LSA: > > AS-external-LSA was not originated. 2004/06/09 00:21:11 OSPF: > > DR-Election[1st]: Backup 10.0.100.1 2004/06/09 00:21:11 OSPF: > > DR-Election[1st]: DR 10.0.100.1 2004/06/09 00:21:11 OSPF: > > DR-Election[2nd]: Backup 0.0.0.0 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: > > DR 10.0.100.1 2004/06/09 00:21:11 OSPF: interface 10.0.100.1 join > > AllDRouters Multicast group. 2004/06/09 00:21:11 OSPF: DR-Election[1st]: > > Backup 199.110.204.253 2004/06/09 00:21:11 OSPF: DR-Election[1st]: DR > > 199.110.204.253 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: Backup 0.0.0.0 > > 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: DR 199.110.204.253 > > 2004/06/09 00:21:11 OSPF: interface 199.110.204.253 join AllDRouters > > Multicast group. > > > > > > On 13 Jun 2004 at 14:38, Vladimir Ivaschenko wrote: > > > > > >>OSPF routing should work by default. > >> > >>Make sure that OSPF key is the same on both nodes, and check that > >>routing tables are correct by doing "ip route". Note that if OSPF is > >>working you will have routes with "proto zebra" in the list. > >> > >>Ray Gwinn wrote: > >> > >>>Vladimir, I have one wisp-disp node up and running fine. This node has an > >>>internet feed via eth0. All hardware is Soekris 4521. > >>> > >>>I have now up a second node. This second node is wireless only. That is, > >>>the second node's internet feed is one of the radios connected to a small > >>>beam pointing at the first (working) node. User's can associate with the > >>>second node, but there seems to be a routing problem. > >>> > >>>My question is, should the default wisp-disp zebra/ospf configs work on > >>>both nodes? If not, can you provide any clues about configuring zebra/ospf > >>>for the two nodes? > >>> > >>>Ray > >>> > >>> > >>> > >>>------------------------------------------------------- > >>>This SF.Net email is sponsored by the new InstallShield X. > >>>>From Windows to Linux, servers to mobile, InstallShield X is the > >>>one installation-authoring solution that does it all. Learn more and > >>>evaluate today! http://www.installshield.com/Dev2Dev/0504 > >>>_______________________________________________ > >>>leaf-wisp-dist mailing list > >>>[EMAIL PROTECTED] > >>>https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > >>> > >> > >> > >>-- > >>Best Regards, > >>Vladimir Ivashchenko > >>ThunderWorx - www.thunderworx.com > >>Senior Systems Designer/Engineer > > > > > > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by the new InstallShield X. > >>From Windows to Linux, servers to mobile, InstallShield X is the > > one installation-authoring solution that does it all. Learn more and > > evaluate today! http://www.installshield.com/Dev2Dev/0504 > > _______________________________________________ > > leaf-wisp-dist mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > > -- > Best Regards, > Vladimir Ivashchenko > ThunderWorx - www.thunderworx.com > Senior Systems Designer/Engineer > > > > ------------------------------------------------------- > This SF.Net email is sponsored by the new InstallShield X. > >From Windows to Linux, servers to mobile, InstallShield X is the > one installation-authoring solution that does it all. Learn more and > evaluate today! http://www.installshield.com/Dev2Dev/0504 > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
